Tag Archives: Test (assessment)

T4TS How to Guides: Cliff’s Train4TradeSkills Practical Training – Week 6

Monday:

Well it’s Week 6 and the beginning of the end of level 2 this morning. There’s another group of students arriving for their practical, whether it be plumbing or electrics, week one or eleven all are mingling around the canteen chatting about their journeys, meeting new people or even some familiar faces met on previous visits.

I already know what I have in-store for me this week it’s my bathroom install assessment, and I am looking forward to getting on with it. The ATL centre is still down one tutor due to sickness so Robert is going to have to spread his time between two groups again, which is not a problem as we are supposed to do the install without any help from the tutors.

Nevertheless he spends twenty minutes with us explaining the requirements of the task, which include designing the layout, a full materials list, a written summary description and photographic evidence. So a good part of the morning is spent planning and setting out, we are to use plastic pipe and John Guest Speedfit® fittings below floor level and copper above floor level so it is going to be quite a quick install and I have almost finished the first fix by 4.30pm so I call it a day.

Tuesday:

Not feeling so good this morning as I am aching all over and have the sniffles first signs of man flu -just what I need this week! I get down to work regardless and soon complete the first fix and notching of the floor boards and proceed to pressure test the first fix.

Out in the real world this would be no problem as all my fitting would be new but here in the centre we re-use old fittings, so after changing several faulty service valves I manage to complete a successful pressure test and with the help of another student take the first of my photographic evidence photo’s.

I have been trying since I arrived yesterday to get Robert to read my updated summary description from last week so that I can sign the work off in my portfolio, but he is hard to pin down for long and I have to literally stand in front of him with my work and a pen to get him to check it and even then he only has time to scan it briefly before we are informed that we have exams in five minutes, Ouch wasn’t expecting that Wednesday is the usual day for exams but due to the amount of exams to get through this week they had decided to start earlier in the week.

So I have two exams Environmental Awareness In Plumbing and Effective Working Relationships In The Plumbing Industry, It feels very thrust upon us and my head is banging with the onset of flu, I Have a real problem keeping focused in the exam and am not happy when I leave the examination room and with good reason as it turned out.

I flunked the environmental awareness exam which surprises me as it’s a bit of a pet subject for me, re-sits Thursday before I can sit the end GOLA exam. So a bit disconsolate I return to my bay to continue with my bathroom install, “at least that is going well” Robert has spotted that I am not at my best and comes and spends a bit of time with me going over the environmental awareness with me, I really like Robert and his teaching methods and I am feeling much better when I leave for home.

Wednesday:

The Flu has really got me now and I am avoiding contact with rest of the group to avoid passing it on, fortunately I am working in a bay on my own so they should be OK as long as they keep their distance.

I get my head straight to finishing my installation and have it completed by lunchtime with no problems at all and took the other photo for the supplementary evidence and had Robert in to check and appraise the installation. I am not the first to finish this week but I am very happy with the finished job.

The sun is out today and I enjoy lunch sitting out in the fresh air and it makes my flu feel not so bad. The afternoon was spent methodically decommissioning the bathroom, counting and listing all the fixtures, fittings and pipe work used in the bathroom as I can use it to make a the accurate material’s list needed for supplementary evidence. It takes the whole afternoon to strip out, recycle and return the bay back to the blank canvas it was to begin with, I would of liked to get away early today to revise but it 5pm by the time I leave the centre tiered but satisfied that I only have my write-up left to do.

Thursday:

Big day today as its re-sit and my GOLA Assessment End Test, and there is no waiting around were straight into the exam room at 9.30am I have fully prepared myself with max strength flu capsules this morning and am feeling much clearer in the head the re-sit is easy and I have no problem with 18 questions then its straight on with the GOLAHOO!!! Lots of good vibes going around everyone’s done really well nobody needs to re-sit.

So congratulations to all my fellow students who completed their Level 2 plumbing. I can now look forward to starting my level 3 course work and I will be back soon with a week 7 training diary many thanks also to my friends and family for all your support, especially my partner Carmen without you none of this would have happened.

Read the rest of Cliff’s practical training diaries on his plumbing blog at www.plumbing-student.blogspot.com

T4TS How to Guides: Cliff’s Train4TradeSkills Practical Training – Week 5

Hi and welcome again to my diary of practical training. This week’s assessments will be sheet lead weathering’s. Also I have two exams:one on Electrical supply and earth continuity and the other on sheet lead weathering’s .

Monday:

As with every other first day I am not sure who is going to be in my group or who my tutor is going to be, when I arrive at the ATL centre in Featherstone I get straight down to business finding out who is in my group and introducing myself.

There are 14 other students in my group again made up of people mainly from the northern counties and Scotland of varying ages, everyone is pretty calm as we have all been here to this centre before. The group is split into two immediately depending on whether individuals are there for one or two week stints but as this would make the groups uneven I am put with the group who are only doing a one week stint. We are to do our sheet lead while the other group will be doing their final bathroom assessment.

My tutor for the week is Mike. It’s the first I have had Mike as a tutor but he is from the same area of Bradford as me and we hit it off straight away. First he does an introduction to the health and safety issues concerning lead it being extremely heavy and toxic so barrier cream and careful handling are a must. We are then introduced to the welding equipment which would normally be an oxyacetylene and oxygen torch but because lead is going to be dropped from the syllabus soon, we are to be using a miniature propane torch; they are much cheaper if somewhat less accurate.

We spend the rest of the morning practicing welding techniques, and I have to say at this point it is very different from what we learned in copper jointing and also much more an acquired skill that takes patience and a steady hand. In the afternoon we are given our first assignment which is a lead slate to go over the soil vent pipe protruding a roof plus a written summary description, materials list and two photographs for supporting evidence,

It is a more complicated task than it may first appear, getting the roof pitch onto the upright cylinder is a 10 stage process that I’m not going into now as you will be guided through it by a tutor, needless to say the task takes all afternoon to complete.

Tuesday:

We start the day with a bit of welding practice just to make sure we haven’t forgotten everything overnight and I find it much easier than I had the previous day and are introduced to lead bossing and spend the time up until morning break beating bits of lead into various shapes.

We are then given our second assessment task which is manufacture and install a full chimney weathering set, written summary description, materials list and two photographs for supporting evidence. The first part of which is the front apron this is to be formed using bossing only and takes a whole hour to form the required shape, hopefully this would not normally take that amount of time with more experience I would expect to half that time, but we are in no rush as we have the rest of the week to complete the assessment.

The roof and chimney we are using for this task is a low level purpose made facade so the whole installation can be done without leaving the ground and the manufacturing of the parts can be done on the bench and be taken out to check how well each part fits and or final adjustments.

As it is nearly lunchtime I take an early break and spend a long lunch chatting with other students in the centre as there are people at various stages and trades within the centre and I personally think it’s good to spend time talking with them also. After lunch I set about manufacturing the side flashing’s again this is quite complicated and takes several hours to make fit snugly, so even though I start to make the back gutter I don’t get far into it before it’s time to pack up for the day.

Wednesday:

Got off to a bad start today and I don’t arrive at the centre until 10am this turns out not to be to much of a problem as our tutor has been taken ill in the night and won’t be back to work for several days we are now handed over to Robert whom I have been tutored before in weeks three and four.

So I get on with completing the back gutter this part is made with a combination of bossing and welding but by now I am really getting the hang of forming lead and have it finished very quickly and set about get all my parts installed on the low level chimney (in the rain) I was very pleased with the end result and Robert gave me a nice appraisal, there is just enough time before lunch to dismantle the installation.

During lunch I can feel the tension in the air as Wednesday is exam day starting straight after lunch as there are lots students we can’t all fit in at once so I have a little time to wait before I can get in to the exam room to do mine but I eventually get in at 2.30pm and start with my Electrical Supply and Earth Continuity exam which goes very well and I know I have done well even though I will have to wait for my results. However with my second exam Sheet Lead Weathering

Thursday

Feeling tired this morning but all my practical assessments are complete and I just have my summaries to write up, this to me is the hardest part and I more than expect it to take all day in the centre because of the constant activity and people wanting to chat. But I like it that way as it forces you to take regular breaks which I find allows me to concentrate better during the time I am writing.

Robert my tutor also spends some time with me one to one on sheet lead theory which was an excellent way to revise, as a home study course it is something I don’t really have access to other than down a phone line which is definitely not the same. Anyway I decide to leave early so I can get my photographs and write ups printed ready for tomorrow.

Friday:

Last day all ready the week has gone very quick as always, I have my re-sit at 9am so I just sit chatting with the other students who also have re-sits, the time soon passes and I am in and out again in 20 minutes and I am pretty sure that it’s in the bag, so I spend some time with Robert reading through my summaries and he is not impressed and request me to expand them as they are not even half long enough and would be failed by the City & Guilds examiner.

We go through the rest of my portfolio and make sure everything is signed and up to date, and then I get the result of my exam (PASS). So knowing that I have lot of writing to do to expand my summaries I decide to get off home.

That’s it for my practical training diary for this week except to say that I have re-written my summaries before I wrote this diary and I am quite happy with them but we will have to wait until next week to see if Robert feels the same way.

Thanks for reading, Kind regards Cliff.

Want to read other practical training diaries by Cliff about his Train4TradeSkills Course? Then head over to Cliff’s Plumbing Blog at www.plumbing-student.blogspot.com

Cliff’s Diary of his Train4TradeSkills Practical Training – Week 4

Monday:

I am back in Featherstone for week 4 of my practical training there are not so many students this week and I am in a group of three. Our main task for the week is an airing cupboard fitting a hot water storage cylinder, feed and expansion tank also running a single hot feed to a hand basin.

This is part of the requirement for city & guilds 6129 course and is assessed but there is no photo and summary required. You can have two attempts to complete this task but if you are happy with your first install it is not necessary and you can move on to other things.

We don’t need a materials list for this task so it’s straight to work on the install. We can install this system any way we see fit and the only information given is that we must use as many machine bends as possible so as not to slow the flow of water.

This is quite a task as a great deal of the pipe work is in 22mm which is difficult to bend by hand, but after last week’s LCS I am feeling pretty pumped up and find it less difficult than my first attempts with 22mm pipe.

By lunchtime I am well into the install and have the feed and expansion tank completed and the feed to the cylinder also. After a catch up with the other students over lunch were back to work fitting the primary vent pipe which is the most complex of all the bends as it has a bridge, offset and two 90 ̊ bends all in one piece of 22mm tube. This takes the best part of an hour to work out and pull accurately but once complete the rest is plain sailing and by the end of the afternoon I have the system filled with water and soundness tested

Tuesday:

Having soundness tested the install the previous day and left the system filled overnight, Robert our tutor assessed the install and passed it with some nice comments on neatness and the quality of the bends and said that it was not necessary for me to do a second install and that I could decommission and move on.

The decommission takes a long time as there is a large quantity of water in the system so the morning soon passes. During lunch I spent some time with a group of students on their first week of training and am able to give some advice on what to expect during the week and hopefully helped them to avoid some of the mistakes people were making when I was there for week 1.

This was good because it allowed me to realise just how beneficial the first weeks were to me and how much I had retained to memory. In the afternoon Robert did air testing drainage systems with me and I got acquainted with a manometer, I also did two test papers ready for the exams the following day which I failed miserably much to my disgust, so out came the books and I spend the rest of the day doing some serious revision in the canteen.

Wednesday:

Feeling pretty tired today. I did another 2 hours revision when I got home last night and am just hoping I haven’t done too much and bamboozled myself with facts and figures.

I am given another task by Robert a Soil and Waste fit in one of the bays. It’s not a long task but there are two photo’s, a written summary and a materials list needed for this task. It really helps me clear my head and distracts me from worrying about the exams as I excel in the practical parts of the course.

And I am feeling much more relaxed by lunch. During lunch talking with fellow students I realise it’s not only me who has been dreading exam everyone failed the mocks and spent a long night of revision but are now all feeling pragmatic about them pass or fail, my own attitude is failure is NOT an option.

1pm: Exam time today we have Sanitation systems and Central Heating Systems both are about 30 questions multiple choice and computer based with about 60mins allocated for each which again is more time than is necessary and even spending lots of time over the papers I’m out within the hour relieved that there over with.

The rest of the day is to be a Rain Water System install again not a very long task but photo’s, materials list and a written summary is required for my portfolio, the install only take 30mins and the remainder of the day is spent doing materials lists and summaries for the last two tasks. We get our results from our exams quite late in the afternoon and I’m very pleased to say I passed both – CHUFFED!!!

Thursday:

Today is about getting my portfolio up to date and making sure everything is signed and dated correctly. Absolutely everything has to be signed and counter signed by the tutors, so Robert spends a whole morning going through our files with us, he also dose some talks on Solvents, Scaffolding Erection and The Safe Use Of Power Tools so that they can also be signed as completed.

He has also given us a talk on what to expect on our final two weeks and it sound like it’s going to be very intense with lots of summaries to do. I am all up to date with everything completed so there is no need for me to attend for the Friday. Friday’s seem to be for resit’s of exams and also any work that needs to be completed, so far I haven’t needed to attend on Fridays hope I can continue in that manner.

Hope you have enjoyed the read I have 4 more TMA’s to complete the level 2 then 2 more weeks practical so am hoping to be back with parts 5 & 6 of the diary soon.

To see photos from Week 4 of his practical training and read his other diaries, visit Cliff’s blog at www.plumbing-student.blogspot.com

Cliff’s Diary of his Train4TradeSkills Practical Training – Week 3

Well here it is again I am in Featherstone for week 3 practical training. I am not at all nervous this time and have had a week of revision on hot and cold water systems and environmental awareness, as these are the exams I will be having during the week.

I was thinking it was going to be a completely different group of people this week so i was pleasantly surprised to see one person from my group from weeks 1 & 2, Hi Jermaine hope you enjoyed your week as much as me, anyway I won’t get distracted with name dropping.

Monday:

Its Monday morning and I have been on the go since 5.15am, as we start at 8.30 but everyone there at 8 chatting and introducing themselves, It’s a nice mix of ages and there are also two women in the group this week and 12 people in all.

Straight away the group is split into two for the week one group to do Low carbon steel the other doing airing cupboard we will swap over next week, so this week is LCS for me. I know it is going to be hard going as it the warmest day of the year so far and the humidity is really high. We start our day with an introduction to LCS cutting, threading and bending equipment and a bit of relevant health and safety as its dirty and lots of very sharp steel fragments around so gloves are well recommended to save on cuts and abrasions.

I don’t think anyone was quite prepared for how physically demanding LCS threading with stocks and dies actually is especially on such a hot day and by lunch time everyone is soaking with sweat and in dire need of a break. In the afternoon we are given our first assessment for the week which is a small jig similar to the one done in week 1 except in LCS.

This has to be accurate to within 2mm which is very difficult because of the nature of the material and the way in which it is jointed. I had this finished well within the allocated time and was able to spend some extra time doing some more complicated bends on the hydraulic machine bender to fill in the rest of my day, but believe me when I say I really needed a cold shower when I got home and my shoulders were aching badly.

Tuesday:

Awoke very stiff in the shoulders this morning to another hot day even though the weatherman had promised rain overnight there is no evidence of it. I arrived for 8am and everyone in my group is feeling pretty sore today and wondering if it’s going to be like this all week and generally having a gripe about the fact that they never want to be involved in any LCS installations. This is a bit of a knee jerk reaction but I can understand where everyone coming from.

We have a different tutor today as the staff are a bit short handed this week and Neil who has been my tutor since week 1 has to take a different group. But Robert is also very good and easy to understand he gives us our other assignment for the week which is again in LCS with two radiators to fit into a bay with all the pipe work to be pressure tested. We also have to do our own materials list.

I get straight to work compiling a list of pipe, fittings and fixings, this has to be done straight out of a supplier catalogue complete with part numbers, description and quantities, as it is a requirement of the assignment along with a written summary description – more about that later. I just have time before lunch to mark out from the drawing into the bay where the installation is going.

In the afternoon I got all my fixings installed and cut all my tubing cut to length and the majority of the threading complete which is no mean feat when you consider how many threads are required, take another look at the drawing there are lots of threads necessary, so all together an exhausting day.

Wednesday:

I arrive today knowing I have got most of the really physical work done and get on with the two offset Passover bends required for the installation. This doesn’t take long the hydraulic bender is easy to use and you don’t have to calculate for stretch with LCS when doing this sort of bend.

I know I have two exams later today so I want to get as much done as possible before hand and really get my head down to the task in hand, and by lunch time I have surprised even myself and am ready to cap off and pressure test the installation.

1pm: I have two exams now HOT WATER SYSTEMS & COLD WATER SYSTEMS Both are online multiple choice exam with about 90mins given for each. You’ll forgive me for not giving too much information here, but I will say if you have revised these subjects there reasonably easy 35 questions for cold 40 for the hot and a 70% correct answers on each to pass. The time given was far more than required to complete and I had done both in little over an hour so after a short break I got back to pressure testing my rig.

Having got it up to 5 bar and with a few tweaks here and there Robert the tutor passed it off with some nice comments as to the neatness. As he is walking around all the time watching and helping as necessary the fact that he had not had to assist me and also that I had finished long before the others, he was very impressed which gave me a real confidence boost.

The remainder of the day was spent decommissioning the rig, also about an hour after the exam we had our results 95% on both so I went home feeling great.

Thursday:

Big day today as we have a BPEC Energy Efficiency Exam in the afternoon so the morning is classroom based with a PowerPoint Presentation given by Robert. We were given the revision material yesterday but U had fallen asleep with it in my lap having not made it passed the first page. Never the less it is my pet subject as I want to get into the renewable part of the industry.

I was able to get fully involved in the presentation and again surprised myself with the amount of information that I had accumulated and absorbed during my studies and research.

We have an extra long lunch just resting in the sunshine and chatting. The exam is a paper multiple choice, open book exam with 30 questions with an 90% pass requirement with one re-sit available if required.

Again I am going to say if you have paid attention during the morning you have all the answers in your head, so it’s relatively easy and there is no reason why you shouldn’t get 100% on this exam.

So I am out in 20mins a happy bunny. Back to decommissioning or rather decorating as that’s all I have left to do, apart from my summary description, so i do notes for that and having talked to Robert he says that it is not necessary for me to come to the centre Friday and can write up my summary at home.

I am including a copy of my summary description for anyone who has not had to do these before it might be worth a read but please no copying you’ll only be cheating yourself.

Well that’s week 3 complete I hope you have enjoyed the read and find this useful please let me know what you think and watch out for next week’s diary of week 4.

To see photos, diagrams and Cliff’s summary description from Week 3 of his practical training, visit his blog at www.plumbing-student.blogspot.com